Facebook PixelAlgae-powered batteries could be used to power underwater sensors that transmit info via blinking diodes
Brainstorming
Tour
Brainstorming
Brainstorming
Create newCreate new
EverythingEverything
ChallengesChallenges
IdeasIdeas
Guide
TourRulesAbout
Idea

Algae-powered batteries could be used to power underwater sensors that transmit info via blinking diodes

Image credit: Paolo Bombelli et al.

Loading...
Darko Savic
Darko Savic May 25, 2022
Please leave the feedback on this idea
Originality

Is it original or innovative?

Feasibility

Is it feasible?

Necessity

Is it targeting an unsolved problem?

Conciseness

Is it concisely described?

Bounty for the best solution

Provide a bounty for the best solution

Bounties attract serious brainpower to the challenge.

Currency *
Bitcoin
Who gets the Bounty *
Distribution
"Place and forget" underwater sensors that run on algae-powered batteries. The data is transmitted via blinking diodes to a faraway receiver that is using a telephoto lens.
Why?
Ability to "place and forget" sensors in locations that would otherwise require specialized equipment/staff to maintain.
How it works
Algae powered battery
This battery powered by algae ran a low-energy computer chip for 6 months. A bio-photovoltaic energy harvester system using photosynthetic microorganisms on an aluminium anode that can power a microprocessor widely used in Internet of Things applications. This video explains how it works:

This is basically a solar panel + battery in one. It works at night too. It doesn't work when the temperature falls below 5 degrees celsius. So its useful during warm months, or in warmer climates, or underwater.
Underwater sensors
The battery is suitable to power devices that consume low power or short bursts of higher power (via condensers). It could power all kinds of sensors that are needed for long scientific experiments, observation, etc.
Low power communication via diodes
The sensors could be equipped with a few diodes that relay information by blinking in patterns. The blinking would be picked up by a receiver with a telephoto camera. It would have to be within the line of sight. The blinking patterns are then translated back to digital data.
sensorsproduct ideasbattery technology
Creative contributions
Know someone who can contribute to this idea? Share it with them on , , or

Add your creative contribution

0 / 200

Added via the text editor

Sign up or

or

Guest sign up

* Indicates a required field

By using this platform you agree to our terms of service and privacy policy.

General comments

Loading...
jnikola
jnikola3 years ago
Did you see somewhere the application of the blinking diodes? I was first thinking how cool is that, but then again, isn't it simpler to send data via Bluetooth or as radiowaves through an antenna? Diodes would take a lot of time to send even a simple message, plus they need a device that translates the digital signal into blinking and back. All things considered, there could be simpler ways.
Please leave the feedback on this idea
Loading...
Darko Savic
Darko Savic3 years ago
J. Nikola I was thinking about the lowest power consumption to transmit data. Blinking diodes should have plenty of bandwidth to transmit sensor data. Also, the sensor can be very far, as long as it's in the line of sight. The line sight could also be bent/routed with mirrors.
The lights would basically come on once every time the sensor state changes. Radio communication would burn more power I think.
Please leave the feedback on this idea